home *** CD-ROM | disk | FTP | other *** search
/ PC-SIG: World of Education / PC-SiG's World of Education.iso / wor / disk1686.zip / WM.DOC < prev    next >
Text File  |  1990-07-21  |  86KB  |  1,876 lines

  1. | This documentation file is designed to be printed using WordMaster, as it
  2. | employs special printing codes found in the program.  Be sure to install
  3. | the proper Printer Definition File or you may print out some strange
  4. | codes as text.  (See p.12)   The EPSMX80.PDF file will work with most
  5. | printers that have Epson emulation.  This information will NOT be
  6. | printed because of the vertical bar in column 1, one of the special
  7. | printing codes.
  8.  
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.  
  18.  
  19.  
  20.  
  21.  
  22.  
  23.  
  24.  
  25.  
  26.  
  27.                                   Documentation
  28.  
  29.                                        for
  30.  
  31.                                WordMaster  v. 1.41
  32.  
  33.  
  34.  
  35.  
  36.  
  37.  
  38.  
  39.  
  40.  
  41.  
  42.  
  43.  
  44.  
  45.  
  46.  
  47.  
  48.  
  49.  
  50.  
  51.  
  52.                                    MasterWorks
  53.                                   P.O.  Box 116
  54.                                McCleary, WA  98557
  55.  
  56.  
  57.                     Copyright 1989,1990 by William M. Farrar
  58.  
  59.  
  60.  
  61.  
  62.  
  63.  
  64.  
  65.  
  66.  
  67.  
  68.  
  69.                                 Table of Contents
  70.  
  71.  
  72.                Disclaimer  . . . . . . . . . . . . . . . .  3
  73.                Registration  . . . . . . . . . . . . . . .  4
  74.                User Support  . . . . . . . . . . . . . . .  4
  75.                Introduction  . . . . . . . . . . . . . . .  5
  76.                On-line Help  . . . . . . . . . . . . . . .  6
  77.                Creating Your Work Environment  . . . . . .  7
  78.                Keyboard Command Structure  . . . . . . . .  8
  79.                     Cursor Movements . . . . . . . . . . .  8
  80.                     Tab  . . . . . . . . . . . . . . . . .  8
  81.                     Line Commands  . . . . . . . . . . . .  8
  82.                     Delete . . . . . . . . . . . . . . . .  8
  83.                     Undelete . . . . . . . . . . . . . . .  9
  84.                     DOS Commands . . . . . . . . . . . . .  9
  85.                     Help System  . . . . . . . . . . . . .  9
  86.                     Find Commands  . . . . . . . . . . . . 10
  87.                     Block Commands . . . . . . . . . . . . 10
  88.                     Macros . . . . . . . . . . . . . . . . 11
  89.                     Tabs . . . . . . . . . . . . . . . . . 11
  90.                     Margins  . . . . . . . . . . . . . . . 12
  91.                     Printing . . . . . . . . . . . . . . . 13
  92.                     Exiting WordMaster . . . . . . . . . . 13
  93.                     Windows  . . . . . . . . . . . . . . . 14
  94.                     Check Spelling . . . . . . . . . . . . 14
  95.                     Save File  . . . . . . . . . . . . . . 15
  96.                     Files  . . . . . . . . . . . . . . . . 15
  97.                     Fonts  . . . . . . . . . . . . . . . . 15
  98.                     Abort Command  . . . . . . . . . . . . 16
  99.                     Control Character  . . . . . . . . . . 17
  100.                     Move to Indent . . . . . . . . . . . . 17
  101.                     Go To  . . . . . . . . . . . . . . . . 17
  102.                     Jump to Marker . . . . . . . . . . . . 17
  103.                     Hard Space . . . . . . . . . . . . . . 18
  104.                     Playback Scrap Macro . . . . . . . . . 18
  105.                     Set Markers  . . . . . . . . . . . . . 18
  106.                     Set Colors . . . . . . . . . . . . . . 19
  107.                     Set Defaults . . . . . . . . . . . . . 19
  108.                     System Commands  . . . . . . . . . . . 19
  109.                     Toggle Commands  . . . . . . . . . . . 20
  110.                     Help Commands  . . . . . . . . . . . . 22
  111.                Print Formatting Commands . . . . . . . . . 23
  112.                Application Hints . . . . . . . . . . . . . 26
  113.                Appendix I - Command Summary  . . . . . . . 30
  114.                Appendix II - Function Key Table  . . . . . 34
  115.                Registration  . . . . . . . . . . . . . . . 35
  116.                Registration Form . . . . . . . . . . . . . 36
  117.  
  118. |HE       WordMaster v. 1.41                                                         #
  119. |PA
  120.  
  121.  
  122.  
  123.  
  124.  
  125.  
  126.  
  127.  
  128.  
  129.  
  130.  
  131.  
  132.  
  133.  
  134.  
  135.  
  136.  
  137.  
  138.  
  139.  
  140.  
  141.                                   Disclaimer
  142.  
  143.  
  144.        WordMaster is not warranted to necessarily meet the needs of the
  145.        user and by using this software you acknowledge that this software
  146.        may not suit your needs or be completely trouble-free.
  147.  
  148.        Neither MasterWorks nor the author shall be liable for any loss or
  149.        damages, whether real or imagined, that might result from the use of
  150.        this program.
  151.  
  152.        The liability of MasterWorks and the author is limited to replacing
  153.        defective disks or corrupted program files.
  154.  
  155.  
  156.  
  157.  
  158.  
  159.                                    * * *
  160.  
  161.  
  162.  
  163.        WordMaster is written in Turbo Pascal and compiled with Turbo Pascal
  164.        5.5, (c) 1983, 1989 by Borland International.   It utilizes routines
  165.        found in the Turbo Pascal Editor Toolbox, (c) 1985, 1987 by Borland
  166.        International.
  167.  
  168.  
  169. |pa
  170.        -----------------------------------------------------------------
  171.                                   REGISTRATION
  172.        -----------------------------------------------------------------
  173.  
  174.        WordMaster is user-supported software. That means that users who
  175.        find the program to be of value and use it regularly are expected to
  176.        register with the author.  Users who register will receive a program
  177.        that allows customization of the command structure and an upgrade to
  178.        the most recent version of WordMaster.
  179.  
  180.        Registered users of WordMaster will also receive advance notice of
  181.        other programs as they become available from the author.
  182.  
  183.        To register WordMaster send $30 to:
  184.  
  185.                                 William M. Farrar
  186.                                   P.O. Box 116
  187.                                McCleary, WA 98557
  188.  
  189.              Washington residents please add 7.8% sales tax ($2.34).
  190.  
  191.  
  192.        Please use the form provided at the end of this document, if
  193.        possible.
  194.  
  195.                                   * * * * * * *
  196.  
  197.  
  198.        Individuals may freely copy and share the shareware version of this
  199.        program, provided they include ALL the WordMaster files on the
  200.        distribution media.
  201.  
  202.  
  203.        Commercial distributors may distribute WordMaster providing they
  204.        charge no more than $6 per disk for the program files, include ALL
  205.        the shareware files on the disk and plainly state in their catalogs
  206.        and advertising that they are selling shareware.
  207.  
  208.  
  209.        -----------------------    USER SUPPORT    ------------------------
  210.  
  211.  
  212.        Non-registered users will receive limited support from the author
  213.        providing they include a self-addressed, stamped envelope with their
  214.        request.
  215.  
  216.                                       - - -
  217.  
  218.                REGISTERED USERS HAVE UNLIMITED SUPPORT AVAILABLE.
  219.  
  220.                                       - - -
  221.  
  222.  
  223.              Thank you for using and supporting shareware software.
  224.  
  225.  
  226.                                  Introduction
  227.  
  228.  
  229.  
  230.        WordMaster is an extremely easy wordprocessor/editor to learn to
  231.        use. There is a built-in menuing system that is designed to perform
  232.        many basic commands while providing visual cues and a rather
  233.        complete help system to guide the user toward full utilization of
  234.        the program's potential.
  235.  
  236.        In the upper right corner of the WordMaster screen is displayed <F1
  237.        for menus>.  So press <F1>.  You will see a menu across the top of
  238.        the screen that gives you the following options:
  239.  
  240.        File   Window   Text   Block   Goto   Search   Options   Misc
  241.  
  242.        You can access much of the command structure of WordMaster from this
  243.        menu by pressing the highlighted first letter of that area. You can
  244.        now execute any of the listed commands by pressing the highlighted
  245.        first letter of the command or by moving the lightbar to the command
  246.        and pressing <Enter>.  If you have one set of commands displayed and
  247.        wish to move to another you can use the <left/right> arrow keys to
  248.        move between command lists so long as only the first level of
  249.        commands is displayed. For example, if you have the Window command
  250.        list displayed, with its choices of Open, Close Previous, Next,
  251.        Zoom, and you want the Block commands, simply press the <right
  252.        arrow> twice to move to the list of block commands.
  253.  
  254.        New users will find all the basic commands for loading a file and
  255.        then saving it and exiting from WordMaster under the File heading.
  256.        Here is an example of using this method of executing commands:
  257.  
  258.        Upon loading WordMaster, you will be presented with a blank screen
  259.        with the name "New File" at the left side of the top border.  If you
  260.        want to create a new document you can begin entering it immediately.
  261.        At any point you can give it a name by pressing <F1> and pressing F
  262.        for the File option (or if you are aready at the File option, simply
  263.        press <Enter>. Then press N (for Name) or move the lightbar down to
  264.        "Name current file" and press <Enter>.
  265.  
  266.        If instead of creating a new file you wish to edit an existing file,
  267.        choose the File option and enter O for Open or move to the Open
  268.        option and press <Enter>.  You will then be presented with a prompt
  269.        box displaying *.* for the current directory. If the  desired file
  270.        is in the current directory, simply press <Enter>; otherwise, enter
  271.        the correct path then press <Enter>. You will be presented with a
  272.        list of all the files in the directory selected. Move to the desired
  273.        file and press <Enter>.  (Hint:  if the directory is long, you can
  274.        move more quickly by entering the first letter of the desired letter
  275.        and you will be taken to the closest file beginning with that
  276.        letter.)
  277.  
  278.           WARNING:  DO NOT attempt to <ESCape> from the 'Open File' prompt
  279.           menu.  If you do, you will be forced to exit the program.
  280.  
  281.        When you have finished creating or editing your file you can switch
  282.        to another file by choosing the File option, then pressing G for "G
  283.        to new file" or moving to the "Go to.." option and pressing <Enter>.
  284.        You will be prompted to save the file if that has not been done. You
  285.        will then be given the same prompt for path as in initially opening
  286.        a file.
  287.  
  288.        When you have finished your WordMaster session, you can exit in two
  289.        ways.  Using the File menu you can choose either Exit/save or
  290.        Quit/abandon.  With the Exit/save option the file will automatically
  291.        be saved and you will then exit the program.  With the Quit/abandon
  292.        option you will exit the program immediately without saving any
  293.        changes made to the file.
  294.  
  295.        There is, of course a much faster way of accomplishing all this by
  296.        learning the function key and control key commands in the WordMaster
  297.        command structure.  Anyone who intends to use WordMaster to any
  298.        significant extent is encouraged to begin learning this as soon as
  299.        possible, as the menu system is really designed to help beginning
  300.        users and those who use the program rather rarely.
  301.  
  302.  
  303.                                       * * *
  304.  
  305.  
  306.                                   On-line Help
  307.  
  308.  
  309.        The <F1> menus can also be used to access the help system.  For
  310.        example, in the above procedure you might have wanted to know what
  311.        the Save changes/backup command would do.  In order to find out,
  312.        simply move the light bar to the command and press <F1> and you will
  313.        be presented with a short summary of the effects of the command.
  314.        Remember to use the lightbar to access the command, as using the
  315.        first letter will execute the command.   Note that when you were
  316.        using the <F1> menus to perform commands that in most cases the
  317.        menus disappeared when the command was executed.  When using them
  318.        for help, however, you must press <Esc> to exit each level of the
  319.        help menus.
  320.  
  321.        Using the <Esc> command also allows you to back out of virtually any
  322.        command if you change your mind about wanting to execute it.
  323.  
  324.        Help is also available with the <Alt-F1> command.  You will be
  325.        presented with a list of topics that can be accessed by moving to
  326.        the desired item and pressing <Enter>.
  327.  
  328.                                       * * *
  329.  
  330.  
  331.        Information on registration is to be found by selecting the Misc
  332.        option on the <F1> menus and pressing R.
  333.  
  334.  
  335.  
  336.                         Creating Your Work Environment
  337.  
  338.        Before you begin serious wordprocessing with WordMaster, you will
  339.        want to establish various defaults to make your work as easy as
  340.        possible.
  341.  
  342.        First, you might want to check the color settings -- even if you are
  343.        working with a monochrome monitor.  These settings determine the
  344.        appearance of marked blocks and the various fonts as well as other
  345.        aspects of the display.  The default settings work fine with most
  346.        screens, but there are exceptions.  Access this with the <Ctrl-S>
  347.        <Ctrl-C> or through the menus with <F1, O, C>.  Experiment with
  348.        various settings to achieve the visual mix that suits you best.
  349.  
  350.        You will also want to select the Printer Definition File (*.PDF) for
  351.        your printer.  The EPSMX80 will work with most printers; the dozen
  352.        or so other .PDF files cover some other common printers.  Load this
  353.        with the 'Which printer' option of the print menu, <Shift-F7> or
  354.        <F1, F, P>.  If none of the .PDF files fit your particular printer
  355.        you can easily edit your own file by accessing the print menu and
  356.        choosing the 'Edit printer codes' option.  The menu allows you to
  357.        individually set the various print codes, for which you will need to
  358.        consult your printer manual.  Once the codes are edited, save them
  359.        to a new .PDF file with the 'Save printer setup' option.
  360.  
  361.        You will also want to set your Home Directory so that WordMaster can
  362.        find the help file (WM.HLP) and the default macro file (WM.MAC) from
  363.        any directory you are working in.  Do this with the <Ctrl-S><Ctrl-S>
  364.        command or <F1, O, P, H>.  If you are already in the directory where
  365.        your WordMaster files are stored, simply press <Enter>.  Otherwise,
  366.        enter the correct directory, such as C:\WP.
  367.  
  368.        One other thing you will want to set are the default margins.  The
  369.        program comes with the left margin set at 1 and the right margin at
  370.        75.  The right margin is OK for most purposes, but you will probably
  371.        want to set the left margin at 8 to 10.
  372.  
  373.        Once this is all done use the <Ctrl-S><Ctrl-D> command or <F1, O, S>
  374.        to make these defaults permanent.   Now, whenever you start a work
  375.        session with WordMaster all these things will be set.  Of course you
  376.        can change these settings temporarily for a particular purpose
  377.        without affecting the permanent defaults you have just set unless
  378.        you save them with the <Ctrl-S><Ctrl-D> command.
  379.  
  380.        By taking the time to set these defaults you will save yourself a
  381.        great deal of time and aggravation.  For example, you will never
  382.        again print something out and then discover your fonts didn't print
  383.        because the PLAIN.PDF was loaded, or have to stop and set the left
  384.        margin before you start writing a letter or wonder why you can't see
  385.        the passage you just blocked.
  386.  
  387.        The time spent creating your "perfect" working environment is time
  388.        well spent in getting familiar with the program and in saving
  389.        yourself time later when you need to focus on the job at hand.
  390.        Please do it!
  391.  
  392.                          The Keyboard Command Structure
  393.  
  394.  
  395.                                  Cursor Movement
  396.  
  397.        This first section of commands deals with the various ways of moving
  398.        the cursor through the text.  It's probably unnecessary to mention
  399.        the four basic cursor arrow keys -- left, right, up, down -- or PgUp
  400.        and PgDn; they work just as expected.  To move the cursor one word
  401.        at a time use <Ctrl-Left> and <Ctrl-Right>.  To move to the end of
  402.        the line, use <End>.  To move to the beginning of the current line
  403.        use <Home><Left>.  To move the cursor to the top or bottom of the
  404.        page without scrolling the text, use <Home><Up> and <Home><Down>.
  405.  
  406.        The cursor can be moved through text to the beginning of the last
  407.        sentence or the next sentence by using <Alt-L> and <Alt-N>. <Alt-W>
  408.        and <Alt-Z> will scroll the text on the screen without moving the
  409.        cursor position unless the cursor position is scrolled off the
  410.        screen, which will cause the cursor to stay at the top or bottom
  411.        line of the screen.  The commands <Ctrl-PgUp> and <Ctrl-PgDn> will
  412.        take you to the beginning or end of the document.
  413.  
  414.  
  415.                                       Tab
  416.  
  417.        The <TAB> key [on some keyboards it is simply marked with two
  418.        arrows] moves the cursor to the next Tab setting.  The default Tabs
  419.        are set at every five spaces, so the cursor would advance from
  420.        column 1 to column 6 to column 11, and so forth across the page.
  421.        Using <Shift-Tab> causes the cursor to move backwards.
  422.  
  423.  
  424.                                   Insert Lines
  425.  
  426.        A blank line can be inserted into the text in two different ways,
  427.        <Ctrl-M> and <Ctrl-N>.  There is a reason for having two commands.
  428.        <Ctrl-M> is the command that is given when you press the <Enter> [or
  429.        <Return>] key.  But if you are in typeover mode rather than the
  430.        default insert mode, this will not insert a new line into the text.
  431.        Therefore the <Ctrl-N> command is available.
  432.  
  433.  
  434.                                   Center Line
  435.  
  436.        To center text on a line press <F8> while anywhere on that line.
  437.  
  438.  
  439.                                     Delete
  440.  
  441.  
  442.        The <Del> key deletes the character the cursor is on.  The <Bksp>
  443.        key deletes the character to the left of the cursor.  <Ctrl-End>
  444.        will delete everything on the line to the right of the cursor.
  445.        <Ctrl-Y> deletes the entire line on which the cursor is placed.
  446.  
  447.        A blank line of text can be deleted by using <Ctrl-Y> or by placing
  448.        the cursor on the first column of the line and pressing <BackSp>.
  449.  
  450.  
  451.                                    Undelete
  452.  
  453.  
  454.        <F2> -- Restore line to status upon entry.  Useful when editing a
  455.                document to undo changes; e.g., accidental deletions with
  456.                the <Ctrl-End> command.
  457.        <Ctrl-Q> -- Restores lines deleted with the <Ctrl-Y> command.
  458.  
  459.  
  460.  
  461.                                       * * *
  462.  
  463.  
  464.        WordMaster command structure combines full utilization of the
  465.        function keys plus a fairly logical system of Control Key
  466.        combinations. The following material is listed, first, by Function
  467.        Key order. In some instances related commands that utilize Control
  468.        Key sequences are listed together with the Function Key commands for
  469.        simplicity. Command sequences that do not involve the Function keys
  470.        but only the Control Keys, are generally listed in alphabetical
  471.        order of the Control Key commands.
  472.  
  473.  
  474.                                  DOS Commands
  475.  
  476.  
  477.        <Ctrl-F1> -- Go to DOS Shell.  This command opens up a window to the
  478.        DOS command line so that you can execute any program or command
  479.        without leaving WordMaster -- provided there is sufficient RAM.
  480.  
  481.        <Shift-F1> -- Change logged Directory.  This gives one the option of
  482.        changing to a desired directory or subdirectory.
  483.  
  484.  
  485.                                 The Help System
  486.  
  487.  
  488.        <Alt-F1> -- This command activates a subsidiary help system that is
  489.        designed to remind you of commands when you are using the normal
  490.        keyboard command structure.  It can be accessed in two ways.
  491.        Pressing <Alt-F1> will bring up a menu of command groups. Move the
  492.        light bar to the desired area and press <Enter>.  You will be
  493.        presented with summary of the keyboard commands.  The same menu can
  494.        be accessed through the <F1> menus by selecting the Misc option, and
  495.        then Help.  Again, use <Esc> to exit each level.
  496.  
  497.        <F1> --  Activates the Menu System, as explained above.
  498.  
  499.  
  500.  
  501.                                  Find Commands
  502.  
  503.  
  504.        <Ctrl-F2> -- Find and Replace.  You are prompted for a string -- any
  505.        sequence of letters and numbers, not necessarily a complete word and
  506.        not limited to a single word.  After entering the string to search
  507.        for, you are prompted for the string to replace it with.  Finally
  508.        you are presented with a series of options: UBGWLN.
  509.  
  510.        'U'  ignores case in the search, treating all alphabetic characters
  511.           as uppercase.
  512.        'B'  searches backward from the present cursor position to the
  513.           beginning of the file.
  514.        'G'  searches globally.  The entire file is searched starting at the
  515.           beginning of the file unless the 'B'option is also chosen.
  516.        'W' searches for whole words only. Matching patterns embedded in
  517.           other words will be skipped.
  518.        'L' Searches only within a marked block.
  519.        'N' Will replace without asking for confirmation.
  520.  
  521.        <Shift-F2> -- Find Next.  Repeats actions set up for Find Pattern.
  522.  
  523.        <Alt-F2> -- Find Pattern.  Searches for any string that is entered
  524.        at the prompt.  Has the same search options as above except for the
  525.        'N'.  <Shift-F2> takes you to the next occurence of the string
  526.        without the entry procedure.
  527.  
  528.  
  529.  
  530.                                 Block Commands
  531.  
  532.  
  533.        Learning to use the block commands with facility greatly increases
  534.        the ease with which text can be manipulated.
  535.  
  536.        <Ctrl-F3> -- Block Start.  Marks where the block is to start.
  537.           <Ctrl-B><Ctrl-S> is an alternate command.
  538.  
  539.        <Shift-F3> -- Block Move.  Moves a marked block to cursor.
  540.           <Ctrl-B><Ctrl-M> is an alternate command.
  541.  
  542.        <Alt-F3> -- Block Copy.  Copies a marked block to cursor.
  543.           <Ctrl-B><Ctrl-C> is an alternate command.
  544.  
  545.        <F3> -- Block End.  Marks the end of the block.
  546.           <Ctrl-B><Ctrl-E> is an alternate command.
  547.  
  548.        <Ctrl-F5> -- Delete Block.  Deletes a block that has been marked.
  549.           <Ctrl-B><Ctrl-D> is an alternate command.
  550.  
  551.        <Shift-F5> -- Reformats Block.  Reformats a marked block.
  552.           <Ctrl-B><Ctrl-F> is an alternate command.
  553.  
  554.        <Ctrl-B><Ctrl-T> -- Moves to the top of a marked block.
  555.  
  556.        <Ctrl-B><Ctrl-B> -- Moves to the bottom of a marked block.
  557.  
  558.        <Ctrl-B><Ctrl-W> -- Writes a marked block to a file.  You are
  559.           prompted for a file name.
  560.  
  561.        <Ctrl-B><Ctrl-R> -- Reads in a file at cursor position.  You are
  562.           prompted for the file name.
  563.  
  564.        <Ctrl-B><Ctrl-U> -- Marks a single word as a block.
  565.  
  566.  
  567.  
  568.                                     Macros
  569.  
  570.  
  571.        A macro generally consists of a series of actions that are performed
  572.        often enough that it is convenient to reduce the activity to a few
  573.        keystrokes.  An example is given in the chapter on applications.
  574.  
  575.        <Ctrl-F4> -- Load a macro file.  The default file is WM.MAC, but any
  576.           number of .MAC files could be created.  Each one holds 10 macros.
  577.  
  578.        <Shift-F4> -- Save macros to a file.  This means you don't have to
  579.           recreate the macros each time you load WordMaster.
  580.  
  581.        <Alt-F4> -- Edit a Macro.  With this command you can edit an
  582.           existing macro or create a new one.
  583.  
  584.        <F4> -- Playback Macros by Menu.  You are presented with a menu of
  585.           macros 0 - 9 that can be entered at present location.
  586.  
  587.        <Alt-1> through <Alt-9> -- Plays back macros assigned to those
  588.           numbers.  Macro #0 can not be played back with the Alt key.
  589.  
  590.        <Alt-M> -- Search and Apply Macro.  Similar to the <Ctrl-F2> Search
  591.           and Replace.  You are prompted for a string to search for, the
  592.           macro will be applied when the string is found. You are prompted
  593.           for the same search options.
  594.  
  595.        A related command, Macro Record, is found with the Toggle commands.
  596.  
  597.  
  598.                                      Tabs
  599.  
  600.  
  601.        <Alt-F5> -- Restores default tabs.  This is used when you have
  602.           altered the tab line to facilite the entry of data and wish to
  603.           return to the default setting of tabs every five spaces.
  604.  
  605.        <F5> -- Edit Tab Line.  This command allows you to remove any or all
  606.           tab settings and replace them with others.
  607.  
  608.        <Ctrl-S><Ctrl-L> -- Save Tab Line.  If you want a record of your tab
  609.           settings for a certain file, this will place it on the line where
  610.           the cursor is located.  It is preceded by the (|) command so that
  611.           it is not printed.  (See page 21 for more details on this
  612.           command.)  Each tab is indicated by a T, the left and right
  613.           margins by L and R.
  614.  
  615.        <Ctrl-S><Ctrl-T> -- Set Tab Line.  This is a strange command.  It
  616.           resets the tab line so that there is a tab placed at the
  617.           beginning of every word in the line where the cursor is located.
  618.           If the line is blank, all tabs will be removed.  It can be useful
  619.           for column work.
  620.  
  621.        <Ctrl-S><Ctrl-Z> -- Set Tab Size.  This allows you to change the
  622.           default setting of tabs every 5 spaces.
  623.  
  624.        Two related commands, Toggle Tab Line and Toggle Fixed Tabs, are
  625.        found with the Toggle commands.
  626.  
  627.  
  628.                                     Margins
  629.  
  630.  
  631.        <Ctrl-F6> -- Set right margin.  The default setting is 75.   If the
  632.           right margin is set beyond about 80 it will cause most printers
  633.           to print anything beyond that point as a separate line, though it
  634.           will not be registered as such inside WordMaster and really mess
  635.           up page-breaks.
  636.  
  637.        <Shift-F6> -- Set left margin.  The default setting is 1.  Most
  638.           users will want to set it at about 8 and use the Save Defaults
  639.           command to make this the permanent default.  It is useful to be
  640.           able to change the left margin if you are doing a long indented
  641.           passage or need exceptionally wide margins when the document is
  642.           printed or need to print out a document that has left blank space
  643.           on the left for margins.
  644.  
  645.        <Alt-F6> -- Set temporary margin at cursor.  This is a more useful
  646.           command than might seem apparent.  For example, as I am writing
  647.           this the text is automatically wrapping between the default
  648.           margins.  In order to indent this paragraph when I'm finished I
  649.           can go to the beginning of the second line, indent the text,
  650.           press <Alt-F6> to set the temporary margin, then press the
  651.           following command, <F6>, to reformat at the indented margin.
  652.  
  653.        <F6> -- Reformat Paragraph.  This command would not be necessary if
  654.           we never made changes.  But we do and the formatting that was
  655.           done automatically as we entered text gets messed up.  This
  656.           command reformats from the cursor position forward to the end of
  657.           the paragraph.
  658.  
  659.        <Ctrl-R><Ctrl-T> -- Reset Top Margin.  The default is a three line
  660.           margin.
  661.  
  662.        <Ctrl-R><Ctrl-B> -- Reset Bottom Margin. The default is 8 lines.
  663.  
  664.        <Ctrl-R><Ctrl-P> -- Sets a temporary margin.  When both Word Wrap
  665.           and Fixed Tabs are in effect (those are the default settings)
  666.           this command will reset the left margin by one tab setting.
  667.           Giving the command twice will reset by two tab settings, etc.
  668.           Moving the cursor to column 1 cancels the temporary margins.
  669.  
  670.        <Ctrl-R><Ctrl-M> -- Releases the current line's margins.  This
  671.           allows you to enter text beyond the right margin.  The command is
  672.           also useful for placing Printing Format commands in column 1.
  673.  
  674.  
  675.  
  676.                                    Printing
  677.  
  678.  
  679.        <Shift-F7> -- Print a File.  The command brings up a menu of various
  680.           parameters that can be set, such as beginning and ending pages to
  681.           be printed.  For best results, be sure to enter the appropriate
  682.           printer definition file (*.PDF) and make it a permanent default
  683.           by using the Save Defaults command <Ctrl-S><Ctrl-D>.  If
  684.           necessary, use the Edit option to create your own .PDF file.
  685.  
  686.           Use of single sheets is a bit more tricky than using form feeds
  687.           because of the peculiarities of different printers.  Be sure to
  688.           set 'Manual paper feed' to ON and 'Use formfeeds' to OFF.  You
  689.           will probably also have to adjust the length of your page from
  690.           the default setting of 66 to a length that corresponds to the
  691.           number of lines your printer will print before issuing an "out of
  692.           paper" signal to WordMaster telling it to wait for the next page.
  693.           If this adjustment is not made you will probably find yourself
  694.           with a lot of strange looking pages and wasted paper.
  695.  
  696.           There is more on printing in the section on print formatting
  697.           commands (p.23).
  698.  
  699.  
  700.                             Exiting from WordMaster
  701.  
  702.  
  703.        There are two ways to exit from WordMaster.
  704.  
  705.        <Alt-F7> -- Abandon the File and Exit.  There are at least two cases
  706.           in which you might want to exit without saving the file. It could
  707.           be that you just do not want to save whatever you have been
  708.           doing.  The other possibility is a scenario like the following:
  709.           You have loaded a file that you wish to edit.  In the course of
  710.           editing you accidentally delete a very large block of material.
  711.           If you exit without saving <Alt-F7> the changes you made to the
  712.           file will not be saved and the file will still be intact in its
  713.           original form.  Be sure to respond No when asked if you wish to
  714.           save the file!   You can then restart WordMaster, load the file,
  715.           and begin the editing process with the deleted material intact.
  716.  
  717.           Situations like this occur all the time and is the reason
  718.           experienced operators save their work often.  If in the above
  719.           situation you had saved the file <F9> five or ten minutes prior
  720.           to the accidental deletion you could exit without saving, reload
  721.           the file and only have lost the five or ten minutes worth of
  722.           editing rather than valuable data.
  723.  
  724.        <F7> -- Save the File and Exit.  This is the "normal" way to exit
  725.           the program when you are working on material that you want to
  726.           save.
  727.  
  728.  
  729.  
  730.  
  731.                                     Windows
  732.  
  733.  
  734.        Windows allow you to accomplish with ease tasks that would be
  735.        excruciating without them.  Some examples are included in the
  736.        chapter in applications.
  737.  
  738.        <Ctrl-F8> -- Add a Window.  Another window will be opened and you
  739.           will be prompted for the directory from which to select a file to
  740.           put in the window.  You can, of course, give it the name of a new
  741.           file, if you choose.
  742.           <Ctrl-W><Ctrl-A> is an alternate command.
  743.  
  744.        <Shift-F8> -- Close a Window.  Close the window in which you are
  745.           currently located.
  746.           <Ctrl-W><Ctrl-C> is an alternate command.
  747.  
  748.        <Alt-F8> -- Go to Next Window.  The "next" window is the next one
  749.           down the screen.  If you're in the bottom window, the next one is
  750.           the top screen.  If you have only two windows open, this works
  751.           like a toggle between them.
  752.           <Ctrl-W><Ctrl-N> is an alternate command.
  753.  
  754.        <Ctrl-W><Ctrl-P> -- Go to Previous Window.  This is really only
  755.           useful if you have three or more windows open and you don't want
  756.           to go down through them.
  757.  
  758.        <Ctrl-W><Ctrl-R> -- Resize Current Window.  There are times when it
  759.           is convenient to have one window only three or four lines high
  760.           and the much larger.
  761.  
  762.        <Ctrl-Z> -- This command zooms the current window to fill the
  763.           screen.  It works as a toggle -- doing it a second time
  764.           "un-zooms" the window.  A valuable feature when editing in
  765.           several windows simultaneously.
  766.           <Ctrl-W><Ctrl-Z>.  This alternate command exists only for a
  767.           certain aesthetic consistency.
  768.  
  769.  
  770.                                 Check Spelling
  771.  
  772.  
  773.        The spell checking commands work in the shareware version only if
  774.        you have installed Borland International's Turbo Lightning.
  775.  
  776.  
  777.                                    Save File
  778.  
  779.  
  780.        <F9> -- Save File and Continue to Edit.  Pressing this key
  781.           periodically as you work guarantees that in the event of some
  782.           sort of major disaster all your work will not be lost. A word to
  783.           the wise!
  784.  
  785.  
  786.                                      Files
  787.  
  788.  
  789.        <Ctrl-F10> -- Gives you a directory listing of the current logged
  790.           directory or any other.  If you want to see the current
  791.           directory, simply press <Enter> when prompted for a Directory
  792.           Mask.  If you want to see if a certain file is in a directory
  793.           called DATA, simply type \DATA at the prompt and <Enter>.  You
  794.           can also use wildcards to view only certain classes of files.  If
  795.           you want to see only the .BAT files on your root directory, type
  796.           \*.BAT at the prompt.  <Esc> to exit.
  797.  
  798.        <Shift-F10> -- Save File, Switch to New File.  This command is for
  799.           when you've finished work on one file and want to edit another.
  800.  
  801.           You can also use this command to begin a new file after editing
  802.           an existing file.  There are two ways to do this.  If you do not
  803.           yet know what you want to call the new file simply <Esc>
  804.           repeatedly from the directory prompt and you will wind up back at
  805.           "New File."  If you do know what you want to name it, simply
  806.           enter that file name at the prompt and the new file will be
  807.           opened.
  808.  
  809.        <Alt-F10> -- The most frequent use for this command is to give a new
  810.           file a name.  It is potentially dangerous in that you could
  811.           overwrite an existing file -- but you are prompted and asked if
  812.           you want to overwrite the file.
  813.  
  814.        <F10> -- This is the command that you will use when you begin the
  815.           program and wish to begin editing an existing file.  After
  816.           pressing <F10> you will be prompted for the directory in which
  817.           the desired file is to be found.  If you are already in the
  818.           correct directory, simply press <Enter> and you will be shown the
  819.           contents of the current directory.
  820.  
  821.           This command can be used to begin a new file in exactly the same
  822.           way as is explained under <Shift-F10> by entering the name of the
  823.           new file at the prompt.  If you <Esc> out of this command you
  824.           will be taken back to the previous file.
  825.  
  826.  
  827.                                      Fonts
  828.  
  829.        WordMaster has the ability to print in several different fonts,
  830.        depending upon the capabilities of your printer.  If your printer
  831.        has Epson emulation, you should be able to print all these fonts.
  832.  
  833.        The font changes are accomplished by inserting control characters
  834.        into the text.  The easiest way to do this is by using the following
  835.        font commands.  Simply press the appropriate <Alt-letter>
  836.        combination and type the text you wish in that font. When you wish
  837.        to return to normal text simply use the <right arrow> to move the
  838.        cursor one space to the right and continue entering text, which will
  839.        be normal text.  You can see this in action by changing the Toggle
  840.        Attributes command <Ctrl-T><Ctrl-A> to OFF.
  841.  
  842.        If a block is marked, the font command will change the entire block
  843.        to that font.
  844.  
  845.        An alternate way to change fonts is to use the Insert Control
  846.        Character command <Ctrl-C><Ctrl- >.  Use this method with caution as
  847.        it allows you it insert any control character, some of which may
  848.        have unexpected effects.
  849.  
  850.        <Alt-B> -- Print Bold.
  851.  
  852.        <Alt-C> -- Print Compressed.
  853.  
  854.        <Alt-D> -- Print Double-Strike.
  855.  
  856.        <Alt-F> -- Show font.  It is not always possible -- especially on a
  857.           monochrome monitor -- to distinguish the various fonts. Using
  858.           this command will tell you if a special font has been selected or
  859.           if it is normal text.
  860.  
  861.        <Alt-O> -- Change the letter at the cursor position to lower case.
  862.  
  863.        <Alt-P> -- Change the letter at the cursor position to upper case.
  864.           <Alt-O> and <Alt-P> can be useful when a great deal of text needs
  865.           to be change to all upper or lower case.  The text can be blocked
  866.           and then the <Alt> commands will change the entire block.
  867.  
  868.        <Alt-R> -- Print in Superscript.
  869.  
  870.        <Alt-S> -- Print in Subscript.
  871.  
  872.        <Alt-T> -- Print in Italic.
  873.  
  874.        <Alt-U> -- Print with Underscore.
  875.  
  876.  
  877.  
  878.                                  Abort Command
  879.  
  880.  
  881.        <Ctrl-A> -- Abort Command. In most instances in WordMaster the <Esc>
  882.           will cause you to "back out" of wherever you are. But you might
  883.           give a command that cannot by stopped by <Esc> -- <Ctrl-A> should
  884.           get you out of most such situations.
  885.  
  886.  
  887.                                Control Character
  888.  
  889.  
  890.        <Ctrl-C> -- Insert control character.  This can be used to insert
  891.           font characters when editing text.
  892.  
  893.  
  894.  
  895.  
  896.                               Move to Equal Indent
  897.  
  898.  
  899.        When you are working with Indent turned on it is useful to be able
  900.        to move easily from one indented line to another.  <Ctrl-D><Ctrl-U>
  901.        will move you up to the next line that is indented at the same
  902.        column as the current line.  <Ctrl-D><Ctrl-D> will move you down to
  903.        the next line with equal indentation.  Even when you are not using
  904.        Indent, the commands can be a time-saver in moving from anywhere on
  905.        the current line to the beginning of the next line up or down.
  906.  
  907.  
  908.                                      Go To
  909.  
  910.  
  911.        <Ctrl-G><Ctrl-C> -- Go to Column.  Moves the cursor to the
  912.           designated column on the current line.
  913.  
  914.        <Ctrl-G><Ctrl-L> -- Go to Line.  Goes to the designated line in the
  915.           document.  Especially useful when working in Non-Page mode,
  916.           though the program keeps track of lines even when in normal
  917.           pagination mode.
  918.  
  919.        <Ctrl-G><Ctrl-P> -- Go to Page.  Goes to first line of indicated
  920.           page.  Useful for moving quickly through longer documents.
  921.  
  922.        <Ctrl-G><Ctrl-R> -- Go to Previous Cursor Position.  Returns cursor
  923.           to position it occupied prior to last movement. While editing you
  924.           might need to view something using one of the Quick Movement
  925.           commands; this command would return the cursor to your previous
  926.           position.
  927.  
  928.        <Ctrl-G><Ctrl-W> -- Go to Window.  Makes designated window the
  929.           active window.
  930.  
  931.  
  932.                                 Jump to Marker
  933.  
  934.        These commands move you to any of the markers set by the Set Marker
  935.        command.
  936.  
  937.        <Ctrl-J>0 -- Jump to Marker 0.
  938.        <Ctrl-J>1 -- Jump to Marker 1.
  939.        <Ctrl-J>2 -- Jump to Marker 2.
  940.        <Ctrl-J>3 -- Jump to Marker 3.
  941.        <Ctrl-J>4 -- Jump to Marker 4.
  942.        <Ctrl-J>5 -- Jump to Marker 5.
  943.        <Ctrl-J>6 -- Jump to Marker 6.
  944.        <Ctrl-J>7 -- Jump to Marker 7.
  945.        <Ctrl-J>8 -- Jump to Marker 8.
  946.        <Ctrl-J>9 -- Jump to Marker 9.
  947.  
  948.        <Ctrl-J><Ctrl-M> -- Jump to Marker by menu.  This will show you
  949.           which markers have been set.
  950.  
  951.  
  952.                                   Hard Space
  953.  
  954.        <Ctrl-O> -- Use this if you do not want wordwrap to break between
  955.        certain words.  For example, after Mr. or Mrs.  It will be printed
  956.        as a regular space.
  957.  
  958.  
  959.                              Playback Scrap Macro
  960.  
  961.  
  962.        These commands play back Macro 0 the designated number of times.
  963.  
  964.        <Ctrl-P>0 -- You are prompted for number of playbacks -- up to 42.
  965.        <Ctrl-P>1 -- Playback macro 1 time.
  966.        <Ctrl-P>2 -- Playback macro 2 times.
  967.        <Ctrl-P>3 -- Playback macro 3 times.
  968.        <Ctrl-P>4 -- Playback macro 4 times.
  969.        <Ctrl-P>5 -- Playback macro 5 times.
  970.        <Ctrl-P>6 -- Playback macro 6 times.
  971.        <Ctrl-P>7 -- Playback macro 7 times.
  972.        <Ctrl-P>8 -- Playback macro 8 times.
  973.        <Ctrl-P>9 -- Playback macro 9 times.
  974.  
  975.  
  976.  
  977.                                   Set Marker
  978.  
  979.  
  980.        These commands set markers in the text allowing you to move quickly
  981.        from one point to another.  These are temporary markers for the
  982.        duration of the editing session and are not saved when the document
  983.        is exited.  Markers can be moved simply by setting the marker in a
  984.        different location -- it will be deleted at the original location.
  985.        The marker can be deleted without moving it by setting it a second
  986.        time at the same location -- in other words, the command is a
  987.        toggle.
  988.  
  989.        <Ctrl-S>0 -- Sets Marker 0.
  990.        <Ctrl-S>1 -- Sets Marker 1.
  991.        <Ctrl-S>2 -- Sets Marker 2.
  992.        <Ctrl-S>3 -- Sets Marker 3.
  993.        <Ctrl-S>4 -- Sets Marker 4.
  994.        <Ctrl-S>5 -- Sets Marker 5.
  995.        <Ctrl-S>6 -- Sets Marker 6.
  996.        <Ctrl-S>7 -- Sets Marker 7.
  997.        <Ctrl-S>8 -- Sets Marker 8.
  998.        <Ctrl-S>9 -- Sets Marker 9.
  999.  
  1000.        <Ctrl-S><Ctrl-M> -- Set a marker via menu.
  1001.  
  1002.  
  1003.                                   Set Colors
  1004.  
  1005.  
  1006.        <Ctrl-S><Ctrl-C> -- Set Colors.  If you have a color monitor, this
  1007.           command will allow you to change the colors.  With a monochrome
  1008.           system you can reset the highlighting that shows various fonts.
  1009.  
  1010.  
  1011.                                  Set Defaults
  1012.  
  1013.  
  1014.        <Ctrl-S><Ctrl-D> -- Save defaults.  This command allows the user to
  1015.           change some default settings.  For example, if you should prefer
  1016.           to work in typeover mode then use this command while in typeover
  1017.           mode and the default will be changed.
  1018.  
  1019.        <Ctrl-S><Ctrl-E> -- Set default extension.  This command allows you
  1020.           to set a default extension to all files without one.  It can also
  1021.           shorten the process of naming files if they all have the same
  1022.           extension.
  1023.  
  1024.  
  1025.                                 System Commands
  1026.  
  1027.        <Ctrl-S><Ctrl-I> -- System Information.  Displays information about
  1028.           the current file as well as the operating system.
  1029.  
  1030.        <Ctrl-S><Ctrl-P> -- Set Page Length.  Allows changing page length
  1031.           from the default of 66 lines to enable printing on non-standard
  1032.           papers.
  1033.  
  1034.        <Ctrl-S><Ctrl-R> -- Show available RAM.
  1035.  
  1036.        <Ctrl-S><Ctrl-S> -- Set Support Path.  Tells the program where it's
  1037.           files are located.  It is very important to set this to the
  1038.           directory where your WordMaster files are located so that you can
  1039.           use WordMaster from any directory and the program will know where
  1040.           to find the Help file, .PDF files, etc.
  1041.  
  1042.        <Ctrl-S><Ctrl-U> -- Set Undo Limit.  Allows setting a new undo
  1043.           limit.
  1044.  
  1045.  
  1046. |pa
  1047.                                 Toggle Commands
  1048.  
  1049.  
  1050.        All these commands represent on/off choices dealing with how text is
  1051.        displayed and/or handled in other ways.
  1052.  
  1053.        <Ctrl-T><Ctrl-A> -- Toggle Attributes.  Toggles between displaying
  1054.           font attributes and the printer control characters. The default
  1055.           is ON.
  1056.  
  1057.        <Ctrl-T><Ctrl-C> -- Toggle Case.  Toggles character at cursor
  1058.           between upper and lower case.  Will toggle an entire marked block
  1059.           if cursor is in the block.
  1060.  
  1061.        <Ctrl-T><Ctrl-D> -- Toggle Compress at Wrap.  When this is on, all
  1062.           extraneous spaces are removed when text wraps to the next line.
  1063.           This can be very annoying if you are doing columns or other text
  1064.           with empty spaces.  It even allows only one space between
  1065.           sentences.  The default is OFF.
  1066.  
  1067.  
  1068.        <Ctrl-T><Ctrl-F> -- Toggle Fixed Tabs.   Fixed tabs are tabs fixed
  1069.           at regular intervals.  The alternative is tabs fixed on a
  1070.           changing basis, called smart tabs.  When smart tabs is in effect,
  1071.           tab stops are set at the beginning of every word in the previous
  1072.           line of text. This can be useful when creating tables.  The
  1073.           default is ON.
  1074.  
  1075.        <Ctrl-T><Ctrl-H> -- Toggle High-Bit Strip.  Some programs like
  1076.           WordStar set the high bit on words as part of their formatting
  1077.           procedure.  To bring a WordStar file into the ASCII format used
  1078.           by WordMaster, that high bit needs to be stripped.  The default
  1079.           is OFF.
  1080.  
  1081.        <Ins> -- Toggle Insert.  The Insert Key toggles between Insert and
  1082.           Typeover modes.  The default is Insert.
  1083.  
  1084.        <Ctrl-T><Ctrl-I> -- Toggle Autoindent Mode. Autoindent causes each
  1085.           line to begin at the same column as the previous line. This is
  1086.           useful when inputting a section of indented text. It is much
  1087.           used by programmers, who use indenting extensively.
  1088.  
  1089.        <Ctrl-T><Ctrl-J> --  Toggle Right Justify.  Right Justify will cause
  1090.           extra spaces  to be added to  your text so that  the right margin
  1091.           forms  a  perfectly  straight  line,  like  this paragraph. Right
  1092.           justification is somewhat controversial  as the extra white space
  1093.           in  the middle  of the  sentence at  the expense  of white  space
  1094.           around it makes it difficult for some people to read.
  1095.  
  1096.        <Ctrl-T><Ctrl-L> -- Toggle 43-line mode. This enables color systems
  1097.           that can display 43 lines. The default is OFF.
  1098.  
  1099.        <Ctrl-T><Ctrl-M> -- Toggle Marker Display. Toggles whether markers
  1100.           that have been set are displayed or not. The default is ON.
  1101.  
  1102.        <Ctrl-T><Ctrl-P> -- Toggle pagination. This determines whether
  1103.           WordMaster relates to the text as pages or simply as a certain
  1104.           number of lines. The default is ON.
  1105.  
  1106.        <Ctrl-T><Ctrl-R> -- Toggle Macro Record. When the macro record
  1107.           toggle is turned on the program begins to remember everything you
  1108.           enter until you toggle it off. At that point you will be
  1109.           presented with a menu of macros, giving you the option of saving
  1110.           everything you've entered as a macro. This is sometimes the
  1111.           easiest way to write complex macros.
  1112.  
  1113.        <Ctrl-T><Ctrl-S> -- Toggle Snow Check. Needed on some earlier color
  1114.           systems. The default is OFF.
  1115.  
  1116.        <Ctrl-T><Ctrl-T> -- Toggle Tab Line. This toggles the display of the
  1117.           tab settings when set to fixed tabs. The default is OFF.
  1118.  
  1119.        <Ctrl-T><Ctrl-U> -- Toggle Block Cursor. This allows you to choose a
  1120.           large, non-blinking cursor. The default is OFF.
  1121.  
  1122.        <Ctrl-T><Ctrl-V> -- Toggle Tab Writing. When this is set to ON blank
  1123.           spaces are store as tabs (Ctrl-I).  This saves space in the file,
  1124.           but can cause problems if you have it on and load a file that
  1125.           used differently spaced tabs than your default setting.  The
  1126.           default is OFF.
  1127.  
  1128.        <Ctrl-T><Ctrl-W> -- Toggle Word Wrap. Word wrap is what causes your
  1129.           text to go automatically to the next line when you reach the
  1130.           right margin. The default is ON.
  1131.  
  1132.        <Ctrl-T><Ctrl-X> -- Toggle Tab Expansion. This is the companion to
  1133.           Tab Writing.  When it is ON, stored tabs are expanded to blank
  1134.           spaces.  The default is OFF.
  1135.  
  1136.        <Ctrl-T><Ctrl-Z> -- Toggle Initial Zoom. The practical effect of
  1137.           this is whether you would see a second window on the screen or
  1138.           would have to use <Alt-F8> to see it. The default is OFF.
  1139.  
  1140. |pa
  1141.  
  1142.                                  Help Commands
  1143.  
  1144.  
  1145.        These commands will bring you a summary of the keyboard commands
  1146.        associated with the area. You can reach the same windows through the
  1147.        <F1> menus by choosing Misc, Help. [The two commands dealing
  1148.        with the undo buffer just sort of got stuck here!]
  1149.  
  1150.        <Ctrl-X><Ctrl-A> -- Help Summary.
  1151.        <Ctrl-X><Ctrl-B> -- Block Help.
  1152.        <Ctrl-X><Ctrl-C> -- Cursor Help.
  1153.        <Ctrl-X><Ctrl-D> -- Delete Help.
  1154.        <Ctrl-X><Ctrl-F> -- Find/Replace Help.
  1155.        <Ctrl-X><Ctrl-H> -- Status Help.
  1156.        <Ctrl-X><Ctrl-I> -- File Help.
  1157.        <Ctrl-X><Ctrl-K> -- Function Key Help.
  1158.        <Ctrl-X><Ctrl-L> -- Flush Undo Buffer.
  1159.        <Ctrl-X><Ctrl-M> -- Macro Help.
  1160.        <Ctrl-X><Ctrl-N> -- Insert Undo Buffer.
  1161.        <Ctrl-X><Ctrl-P> -- Spelling Help.
  1162.        <Ctrl-X><Ctrl-Q> -- Quick Movement Help.
  1163.        <Ctrl-X><Ctrl-R> -- Print Format Help.
  1164.        <Ctrl-X><Ctrl-S> -- Setting Help.
  1165.        <Ctrl-X><Ctrl-T> -- Tab Help.
  1166.        <Ctrl-X><Ctrl-U> -- Utility Help.
  1167.        <Ctrl-X><Ctrl-W> -- Window Help.
  1168.        <Ctrl-X><Ctrl-X> -- Text Help. 
  1169.  
  1170.  
  1171. |pa
  1172.                            Print Formatting Commands
  1173.  
  1174.  
  1175.        These commands are not accessible through the <F1> menus, only the
  1176.        <Alt-F1> help sections. Learning to use them can add a professional
  1177.        look to your documents.
  1178.  
  1179.        The print formatting commands rely upon the use of a special symbol,
  1180.        the vertical bar |, placed in column 1 of the text. Used by itself,
  1181.        the | symbol simply tells the printer "ignore this line." This makes
  1182.        it a convenient way to write messages to yourself in the text,
  1183.        perhaps to aid when editing the document, such as:
  1184.  
  1185.           |
  1186.           | Eliminate following paragraph?
  1187.           |
  1188.  
  1189.        I have shown these indented so they would print, but the '|' must be
  1190.        in column 1 to trigger the "ignore this line" message.  (If the
  1191.        margin is set at a number greater than 1 -- and it usually will be --
  1192.        then use <Home-Left Arrow> to go to column 1 then <Ctrl-R><Ctrl-M>
  1193.        to release the margin for that line and allow you to place the text
  1194.        in the first column.)
  1195.  
  1196.        If the | symbol is followed by certain codes, the information is
  1197.        passed to the printer to perform certain actions.
  1198.  
  1199.  
  1200.                              Page Format Commands
  1201.  
  1202.  
  1203.           |PO<n>    This command offsets the page to the right by <n>
  1204.                     columns. This changes the margin for the remained or
  1205.                     the document. It is basically the same as using
  1206.                     <Shift-F6> to reset the margin
  1207.  
  1208.           |PA       This command starts a new page.  If pagination in
  1209.                     ON (the default) this will be marked in the left border
  1210.                     with the double line page marker.
  1211.  
  1212.           |PN<n>    This command allows you to set the page number. If
  1213.                     pagination is ON this will be reflected in the Page
  1214.                     number in the top border. This is particularly useful
  1215.                     if you are working on a very long document, as you can
  1216.                     break it in to shorter sections and maintain accurate
  1217.                     page numbers.
  1218.  
  1219.           |PG       This command turns page numbering ON.  The default
  1220.                     is to have page numbering OFF.
  1221.  
  1222.           |PC<n>    This causes the page number to be printed in
  1223.                     column <n> rather than the default, column 33. Use this
  1224.                     command if, for example, you want the page number at
  1225.                     the right margin. This is useful if you are not using a
  1226.                     footer.
  1227.  
  1228.           |PL<n>    This sets the page length to <n> lines.
  1229.  
  1230.           |MT<n>    This sets the top margin to <n> lines. With it you
  1231.                     could set different top margins for different pages.
  1232.  
  1233.           |MB<n>    This sets the bottom margin to <n> lines. Like the |MT
  1234.                     command, you could set different bottom margins on
  1235.                     different pages.
  1236.  
  1237.           |CP<n>    This sets a conditional page break. A new page will be
  1238.                     started if fewer than <n> lines remain on the page.
  1239.  
  1240.           |OP       This command turns page numbering OFF, the default.
  1241.                     However, if you had turned turned page numbering ON
  1242.                     with the |PG command you could turn it off for one or
  1243.                     more pages -- perhaps to accommodate graphics -- and
  1244.                     then turn it back on again.
  1245.  
  1246.  
  1247.        Header Commands
  1248.  
  1249.           |HM<n>    This changes the number of lines between the top
  1250.                     of the page and the header. The default is one line.
  1251.  
  1252.           |HE<n>    This changes the line the header will print on.
  1253.                     Normally, the header is printed on the second line of
  1254.                     the top margin, leaving one blank line at the top of
  1255.                     the page and one blank line between the header and your
  1256.                     text.
  1257.  
  1258.           |HE<text> This command will print whatever text follows as a
  1259.                     header to your document. This is frequently desirable
  1260.                     in reports and other documents where you want an
  1261.                     identifying title on every page. Using the :HE command
  1262.                     on a subsequent page will change the header.
  1263.  
  1264.  
  1265.        Footer Commands
  1266.  
  1267.           |FM<n>    This command sets a new footer margin of <n> lines. The
  1268.                     default is 3 lines.
  1269.  
  1270.           |FO<n>    This sets the footer to line <n>.
  1271.  
  1272.           |FO<text> This prints the <text> as the footer.
  1273.  
  1274. |pa
  1275.        Perhaps the following mockup of a page will make the header and
  1276.        footer commands a little clearer.
  1277.  
  1278.                 -------------------------------------
  1279.           |HM { :            (1 line)               :  }       }
  1280.                 :  Header    (1 line)               :  } |TM   }
  1281.                 :            (1 line)               :  }       }
  1282.                 :   text text text text text tex    :          }
  1283.                 :  text text text text text text    :          }
  1284.                 :  text text text text text text    :          }
  1285.                 :  text text text text text text    :          }
  1286.                 /                                   /          } |PL
  1287.                 :  text text text text text text    :          }
  1288.                 :  text text text text text text    :          }
  1289.                 :  text text text text text text    :          }
  1290.                 :  text text text text text text    :          }
  1291.                 :            (1 line)               :  }       }
  1292.                 :            (1 line)               :  }       }
  1293.                 :            (1 line)               :  }       }
  1294.                 :            (1 line)               :  } |MB   }
  1295.                 :  Footer                           :  }       }
  1296.              {  :            (1 line)               :  }       }
  1297.          |FM {  :            (1 line)               :  }       }
  1298.              {  :            (1 line)               :  }       }
  1299.                 -------------------------------------
  1300.  
  1301.        Simple logic will demonstrate that the following rules must be
  1302.        observed:
  1303.  
  1304.        MT must be greater that HM or the header will not be printed.
  1305.        MB must be greater that FM or the footer will not be printed.
  1306.        PL must be greater that the sum of MT and MB.
  1307.        If either MT or MB are set to zero, page numbers will not be
  1308.        printed.
  1309.  
  1310.        The following symbols are also of use in headers and footers.
  1311.  
  1312.        #  The page number will be printed wherever the # symbol appears
  1313.           in either header or footer. Note that when using a footer that
  1314.           automatic pagination is turned off and the # symbol must be used
  1315.           to place the page number.
  1316.  
  1317.        \  The back slash causes the following character to be interpreted
  1318.           literally. So \# would print the # symbol rather than the page
  1319.           number. Even by itself, the backslack will not be printed.
  1320.  
  1321.  
  1322.        Any header and footer commands should be placed at the very
  1323.        beginning of the document, though they can be placed there after the
  1324.        document is finished. If a header or footer is to be changed, any
  1325.        such change should appear on the last line of the page before the
  1326.        page on which the change is to appear.
  1327.  
  1328.  
  1329.  
  1330.                                 Application Hints
  1331.  
  1332.  
  1333.                                     Formatting
  1334.  
  1335.  
  1336.        On important part of producing an attractive document is in making
  1337.        certain that each part of it is properly formatted. In the normal
  1338.        course of text entry the automatic word wrap will format text within
  1339.        the margins that have been set. There are times though that this
  1340.        formatting is upset by the process of editing a document. One case
  1341.        in which this happens is the insertion of additional material into
  1342.        the text.
  1343.  
  1344.        Example -- You have just written the following sentence in a letter:
  1345.  
  1346.        In response to your request for information in your letter I am
  1347.        enclosing the material about our product.
  1348.  
  1349.  
  1350.        You decide you should insert the date of the received letter into
  1351.        the text and you now have the following:
  1352.  
  1353.        In response to your request for information in your letter of June
  1354.        16 I am
  1355.        enclosing the material about our product.
  1356.  
  1357.  
  1358.        The easiest solution is to press <F6>, the Reformat Paragraph
  1359.        command, as soon as you finish typing the date. If you somehow did
  1360.        not notice the need to reformat you can return at any time and press
  1361.        <F6> at any point in the text before the word 'enclosing,' as
  1362.        reformatting only affects text beginning with the line on which the
  1363.        cursor is positioned when the command is given.
  1364.  
  1365.  
  1366.                                  Indented Text
  1367.  
  1368.  
  1369.        Reformatting is also useful when you want to set off a portion of
  1370.        text by using indented text, as pointed out in the <Alt-F6> command,
  1371.        Set Margin at Cursor. An easier way, if you know in advance that the
  1372.        text is to be indented, is to begin the line at the column you want
  1373.        the text to be indented to and use <Ctrl-T><Ctrl-I> to turn on
  1374.        automatic indent. As you enter the text it will automatically be
  1375.        indented to the column where you began. When you are finished use
  1376.        <Ctrl-T> <Ctrl-I> to turn off the indent and return to normal
  1377.        margins.
  1378.  
  1379.  
  1380.                                     Windows
  1381.  
  1382.  
  1383.        The use of windows can make many editing jobs a great deal easier
  1384.        than they otherwise would be. To open a second (or third, or
  1385.        fourth...) window, simply press <Ctrl-F8> (or <Ctrl-W><Ctrl-A> if
  1386.        you wish to utilize the entire <Ctrl-W> series of commands). You
  1387.        will be prompted for a drive and directory, the default being the
  1388.        current drive and directory. The procedure from this point on is the
  1389.        same as choosing the initial file in Window 1. If the desired file
  1390.        is in the current directory, simply press <Enter> for the listing of
  1391.        files in the directory, then move the light bar to the desired file
  1392.        and press <Enter> to select it.
  1393.  
  1394.        When the second window appears with its file, the screen will be
  1395.        split into two parts. For many operations, this is desirable. If,
  1396.        however, you want the full screen for editing in each file simply
  1397.        press <Ctrl-Z> (or <Ctrl-W><Ctrl-Z>) and the current window will be
  1398.        expanded to the entire screen. As you move between windows with the
  1399.        <Alt-F8> command (or <Ctrl-W><Ctrl-N>, <Ctrl-W><Ctrl-P> series) each
  1400.        window will be a full-screen editing environment.
  1401.  
  1402.        A situation in which using the split screen is advantageous is when
  1403.        you are coping or moving material within the same file, because you
  1404.        can simultaneously view the portion of the document you are that is
  1405.        the source of the material and the portion of the document that is
  1406.        its destination.  The same is true for copying information between
  1407.        two different files.
  1408.  
  1409.        Let us imagine you have a document for which you want to make a
  1410.        Table of Contents. Load the file as usual, then open window 2 and
  1411.        load the file into it also. In the upper window (window 1) go to the
  1412.        place where you want to put your Table of Contents and enter your
  1413.        title, "Table of Contents," and center it with <F8> if you want it
  1414.        centered. Now use <Alt-F8> to go to window 2 and begin paging
  1415.        through the document until you reach a section heading that you want
  1416.        in your table of contents. We will now use the block commands to
  1417.        create the listing.
  1418.  
  1419.        Go to the beginning of the heading and press <Ctrl-F3> to mark the
  1420.        beginning of the block, press <End> to go to the end of the heading
  1421.        and press <F3> to mark the end of the block. Now use <Alt-F8> to
  1422.        return to window 1 and move the cursor to the line you want the
  1423.        heading to appear in your list. Press <Alt-F3> and the line will be
  1424.        copied from window 2 to window 1. Press <F3> to unmark the block.
  1425.        <Alt-F8> takes you back to window 2 to search for the next heading
  1426.        to put in your list.
  1427.  
  1428.        One of the nice things about this editor is that it will reflect any
  1429.        change in all windows in which the file is open. In other words, a
  1430.        line that you block in window 1 will also appear blocked in window
  1431.        2. If you delete something from the file in window 2, it will also
  1432.        be deleted from the file in window 1. Not all editors have this
  1433.        capability, which essentially allows you to edit in both directions
  1434.        between the windows.
  1435.  
  1436. |pa
  1437.                                     Macros
  1438.  
  1439.  
  1440.        Macros have many uses and can save you time when you learn to use
  1441.        them. As an example, we will write a simple macro that will enter
  1442.        your return address on the right side of the page.
  1443.  
  1444.        We first need to access macro editing with the <Alt-F4> command. A
  1445.        menu of Macros 0-9 will appear on the screen. Let's make this Macro
  1446.        #1, so either press <1> or down-arrow to it and press <Enter>. We
  1447.        are now asked for a name. Let's call this macro "Far Right Return
  1448.        Address," so enter that and press <Enter>. We are now presented with
  1449.        a blank window into which we are going to enter the macro.
  1450.  
  1451.        We need first for our macro to go to the column where we want to
  1452.        begin the return address. Let's try 55 (you can adjust this later if
  1453.        your return address is very long or very short). So enter the
  1454.        command <CtrlG><CtrlC> which will tell the macro we want to go to a
  1455.        column. There are two ways to do this. You can simply enter it as
  1456.        text, or you can employ a special capability. Press the <Scroll
  1457.        Lock> key and we are now in Literal mode. Now all you need do is
  1458.        hold down the <Ctrl> key while pressing <g> and <c>. The command
  1459.        <CtrlG> <CtrlC> should appear. Press <Scroll Lock> again to go back
  1460.        to command mode. Now enter 55, the column we want to go to.
  1461.  
  1462.           (Note:  If you do not have a <Scroll Lock> key on your keyboard,
  1463.           try using <Alt-Break>.  If this does not work, contact the
  1464.           author and we will try to work something out for your keyboard.
  1465.  
  1466.        Now we need to tell the macro to <Enter> that command to go to
  1467.        column 55. Simply pressing <Enter> will not work, as it will cause
  1468.        you to exit the Edit Macro window. So, we need to press <Scroll
  1469.        Lock> again to go to literal mode. Press the <Enter> key and the
  1470.        word <Enter> will appear after the 55. Press <Scroll Lock> again to
  1471.        return to normal command mode. Now enter your street address. Note
  1472.        that there should be no spaces at all in your text prior to
  1473.        beginning your street address. When you have finished typing your
  1474.        street address repeat the <Scroll Lock> <Enter> <Scroll Lock>
  1475.        sequence.
  1476.  
  1477.        Begin the procedure all over for the next line of your return
  1478.        address. But you do not go to a new line in the macro editing
  1479.        window. You always enter text in a purely sequential manner, even
  1480.        though the window will sometimes break a word right in the middle as
  1481.        it wraps to the next line. Repeat every step beginning with
  1482.        <CtrlG><CtrlC>.
  1483.  
  1484.        In a normal return address, you would have one line for the street
  1485.        address, one line for the city, state and zip and one line for the
  1486.        date. Since you want to be able to use this macro for a long time,
  1487.        we are not going to enter the date. But it is convenient to end with
  1488.        your cursor at the point where the date will go. So after you have
  1489.        finished entering your city, state and zip and ended that line with
  1490.        <Scroll Lock><Enter><Scroll Lock>, enter the <Ctrl-G><Ctrl-C>55
  1491.        <Scroll Lock><Enter><Scroll Lock> once again. Now press <Enter>
  1492.        without pressing <Scroll Lock> to exit the editing window.
  1493.  
  1494.        Now, press <Alt-1> and your return address macro should appear on
  1495.        the screen. If it does not, recheck each step of the above process.
  1496.  
  1497.        To save this macro for future use press <Shift-F4>. When prompted
  1498.        for a name, give it WM.MAC, as that is the default macro file that
  1499.        will be loaded whenever you load WordMaster. Other macro files with
  1500.        the .MAC extension can be created for special purposes, but they
  1501.        must be loaded with the <Ctrl-F4> command.
  1502.  
  1503.        (The WM.MAC file included with WordMaster has a 'dummy' form of the
  1504.        above macro that can be edited to display your own address.  You
  1505.        might prefer a centered address -- particularly for a business -- so
  1506.        a second 'dummy' macro has been created that omits the sequence
  1507.        <CtrlG><CtrlC>55<Enter> and uses the <F8> command at the end of
  1508.        each line of the address before the <Enter> command to take you to
  1509.        the next line.  Edit it for your own address.  Be sure to save it
  1510.        with the <Shift-F4> command.  If you save it to WM.MAC it will be
  1511.        loaded automatically when you start WordMaster.)
  1512.  
  1513. |pa
  1514.                                    Appendix I
  1515.  
  1516.        ------------------------------------------------------------------
  1517.                                WORDMASTER COMMANDS
  1518.        ------------------------------------------------------------------
  1519.        Character left             ---     <Left Arrow>
  1520.        Character right            ---     <Right Arrow>
  1521.        Word left                  ---     <Ctrl-Left Arrow>
  1522.        Word right                 ---     <Ctrl-Right Arrow>
  1523.        Cursor to left side        ---     <Home><Left Arrow>
  1524.        Cursor to right side       ---     <End>
  1525.        ------------------------------------------------------------------
  1526.        Line up                    ---     <Up>
  1527.        Line down                  ---     <Dn>
  1528.        Top of screen              ---     <Home><Up>
  1529.        Bottom of screen           ---     <Home><Dn>
  1530.        Page up                    ---     <PgUp>
  1531.        Page down                  ---     <PgDn>
  1532.        Scroll up                  ---     <Alt-W>
  1533.        Scroll down                ---     <Alt-Z>
  1534.        Top of window              ---     <Ctrl-PgUp>
  1535.        Bottom of window           ---     <Ctrl-PgDn>
  1536.        ------------------------------------------------------------------
  1537.        Tab                        ---     <Ctrl-I>     [Tab Key]
  1538.        Backward tab               ---     <Shift-Tab>
  1539.        Last sentence              ---     <Alt-L>
  1540.        Next sentence              ---     <Alt-N>
  1541.        ------------------------------------------------------------------
  1542.        Delete current character   ---     <Del>
  1543.        Delete left character      ---     <Ctrl-H>     [Backspace Key]
  1544.        Delete line right          ---     <Ctrl-End>
  1545.        Delete line                ---     <Ctrl-Y>
  1546.        ------------------------------------------------------------------
  1547.        Restore line               ---     <F2>
  1548.        Undo ^Y deletion           ---     <Ctrl-Q>
  1549.        ------------------------------------------------------------------
  1550.        New line                   ---     <Ctrl-M>     [Enter Key]
  1551.        Insert line                ---     <Ctrl-N>
  1552.        Center line                ---     <F8>
  1553.        ------------------------------------------------------------------
  1554.        Invoke DOS shell           ---     <Ctrl-F1>
  1555.        Log drive/path             ---     <Shift-F1>
  1556.        Help menu                  ---     <Alt-F1>
  1557.        Activate menus             ---     <F1>
  1558.        ------------------------------------------------------------------
  1559.        Find and replace           ---     <Ctrl-F2>
  1560.        Find next                  ---     <Shift-F2>
  1561.        Find pattern               ---     <Alt-F2>
  1562.        ------------------------------------------------------------------
  1563.        Begin block                ---     <Ctrl-F3>  [or] <Ctrl-B><Ctrl-S>
  1564.        Move block                 ---     <Shift-F3> [or] <Ctrl-B><Ctrl-M>
  1565.        Copy block                 ---     <Alt-F3>   [or] <Ctrl-B><Ctrl-C>
  1566.        End block                  ---     <F3>       [or] <Ctrl-B><Ctrl-E>
  1567.        Delete block               ---     <Ctrl-F5>  [or] <Ctrl-B><Ctrl-D>
  1568.        Reformat block             ---     <Shift-F5> [or] <Ctrl-B><Ctrl-F>
  1569.        Top of block               ---                     <Ctrl-B><Ctrl-T>
  1570.        Bottom of block            ---                     <Ctrl-B><Ctrl-B>
  1571.        Write block to file        ---                     <Ctrl-B><Ctrl-W>
  1572.        Read file into window      ---                     <Ctrl-B><Ctrl-R>
  1573.        Mark current word          ---                     <Ctrl-B><Ctrl-U>
  1574.        ------------------------------------------------------------------
  1575.        Load macros from disk      ---     <Ctrl-F4>
  1576.        Write macros to disk       ---     <Shift-F4>
  1577.        Edit macro                 ---     <Alt-F4>
  1578.        Playback macro by menu     ---     <F4>
  1579.        Playback macro 1           ---     <Alt-1>
  1580.        Playback macro 2           ---     <Alt-2>
  1581.        Playback macro 3           ---     <Alt-3>
  1582.        Playback macro 4           ---     <Alt-4>
  1583.        Playback macro 5           ---     <Alt-5>
  1584.        Playback macro 6           ---     <Alt-6>
  1585.        Playback macro 7           ---     <Alt-7>
  1586.        Playback macro 8           ---     <Alt-8>
  1587.        Playback macro 9           ---     <Alt-9>
  1588.        Search and apply macro     ---     <Alt-M>
  1589.        ------------------------------------------------------------------
  1590.        Default tabs               ---     <Alt-F5>
  1591.        Edit tab line              ---     <F5>
  1592.        Set tab size               ---         <Ctrl-S><Ctrl-Z>
  1593.        Set tabs to line           ---         <Ctrl-S><Ctrl-T>
  1594.        Save/display tab line      ---         <Ctrl-S><Ctrl-L>
  1595.        ------------------------------------------------------------------
  1596.        Set right margin           ---     <Ctrl-F6>
  1597.        Set left margin            ---     <Shift-F6>
  1598.        Temp margin to cursor      ---     <Alt-F6>
  1599.        Set top margin             ---         <Ctrl-R><Ctrl-T>
  1600.        Set bottom margin          ---         <Ctrl-R><Ctrl-B>
  1601.        Set temp margin            ---         <Ctrl-R><Ctrl-P>
  1602.        Margin release             ---         <Ctrl-R><Ctrl-M>
  1603.        Reformat paragraph         ---     <F6>
  1604.        ------------------------------------------------------------------
  1605.        Print file                 ---     <Shift-F7>
  1606.        Abandon file               ---     <Alt-F7>
  1607.        Save and exit to DOS       ---     <F7>
  1608.        ------------------------------------------------------------------
  1609.        Add window                 ---     <Ctrl-F8>  [or] <Ctrl-W><Ctrl-A>
  1610.        Close window               ---     <Shift-F8> [or] <Ctrl-W><Ctrl-C>
  1611.        Next window                ---     <Alt-F8>   [or] <Ctrl-W><Ctrl-N>
  1612.        Previous window            ---                     <Ctrl-W><Ctrl-P>
  1613.        Resize current window      ---                     <Ctrl-W><Ctrl-R>
  1614.        Zoom current window        ---     <Ctrl-Z>   [or] <Ctrl-W><Ctrl-Z>
  1615.        ------------------------------------------------------------------
  1616.        Check spelling             ---     <Ctrl-F9>
  1617.        Save and continue edit     ---     <F9>
  1618.        ------------------------------------------------------------------
  1619.        File directory             ---     <Ctrl-F10>
  1620.        Save/switch files          ---     <Shift-F10>
  1621.        Write to named file        ---     <Alt-F10>
  1622.        Edit another file          ---     <F10>
  1623.        ------------------------------------------------------------------
  1624.        Select bold                ---     <Alt-B>
  1625.        Select compressed          ---     <Alt-C>
  1626.        Select double              ---     <Alt-D>
  1627.        Show font                  ---     <Alt-F>
  1628.        Lower case                 ---     <Alt-O>
  1629.        Upper case                 ---     <Alt-P>
  1630.        Select superscript         ---     <Alt-R>
  1631.        Select subscript           ---     <Alt-S>
  1632.        Select italic              ---     <Alt-T>
  1633.        Select underscore          ---     <Alt-U>
  1634.        ------------------------------------------------------------------
  1635.        Abort command              ---     <Ctrl-A>
  1636.        ------------------------------------------------------------------
  1637.        Insert control char        ---     <Ctrl-C>
  1638.        ------------------------------------------------------------------
  1639.        Up to equal indent         ---     <Ctrl-D><Ctrl-U>
  1640.        Down to equal indent       ---     <Ctrl-D><Ctrl-D>
  1641.        ------------------------------------------------------------------
  1642.        Go to column               ---     <Ctrl-G><Ctrl-C>
  1643.        Go to line                 ---     <Ctrl-G><Ctrl-L>
  1644.        Go to page                 ---     <Ctrl-G><Ctrl-P>
  1645.        Previous cursor position   ---     <Ctrl-G><Ctrl-R>
  1646.        Go to window               ---     <Ctrl-G><Ctrl-W>
  1647.        ------------------------------------------------------------------
  1648.        Jump marker 0              ---     <Ctrl-J>0
  1649.        Jump marker 1              ---     <Ctrl-J>1
  1650.        Jump marker 2              ---     <Ctrl-J>2
  1651.        Jump marker 3              ---     <Ctrl-J>3
  1652.        Jump marker 4              ---     <Ctrl-J>4
  1653.        Jump marker 5              ---     <Ctrl-J>5
  1654.        Jump marker 6              ---     <Ctrl-J>6
  1655.        Jump marker 7              ---     <Ctrl-J>7
  1656.        Jump marker 8              ---     <Ctrl-J>8
  1657.        Jump marker 9              ---     <Ctrl-J>9
  1658.        Jump to marker by menu     ---     <Ctrl-J><Ctrl-M>
  1659.        ------------------------------------------------------------------
  1660.        Hard Space                 ---     <Ctrl-O>
  1661.        ------------------------------------------------------------------
  1662.        Playback scrap             ---     <Ctrl-P>0
  1663.        Playback scrap 1 time      ---     <Ctrl-P>1
  1664.        Playback scrap 2 times     ---     <Ctrl-P>2
  1665.        Playback scrap 3 times     ---     <Ctrl-P>3
  1666.        Playback scrap 4 times     ---     <Ctrl-P>4
  1667.        Playback scrap 5 times     ---     <Ctrl-P>5
  1668.        Playback scrap 6 times     ---     <Ctrl-P>6
  1669.        Playback scrap 7 times     ---     <Ctrl-P>7
  1670.        Playback scrap 8 times     ---     <Ctrl-P>8
  1671.        Playback scrap 9 times     ---     <Ctrl-P>9
  1672.        ------------------------------------------------------------------
  1673.        Set marker 0               ---     <Ctrl-S>0
  1674.        Set marker 1               ---     <Ctrl-S>1
  1675.        Set marker 2               ---     <Ctrl-S>2
  1676.        Set marker 3               ---     <Ctrl-S>3
  1677.        Set marker 4               ---     <Ctrl-S>4
  1678.        Set marker 5               ---     <Ctrl-S>5
  1679.        Set marker 6               ---     <Ctrl-S>6
  1680.        Set marker 7               ---     <Ctrl-S>7
  1681.        Set marker 8               ---     <Ctrl-S>8
  1682.        Set marker 9               ---     <Ctrl-S>9
  1683.        Set colors                 ---     <Ctrl-S><Ctrl-C>
  1684.        Save defaults              ---     <Ctrl-S><Ctrl-D>
  1685.        Set default extension      ---     <Ctrl-S><Ctrl-E>
  1686.        Show system info           ---     <Ctrl-S><Ctrl-I>
  1687.        Set a marker via menu      ---     <Ctrl-S><Ctrl-M>
  1688.        Set page length            ---     <Ctrl-S><Ctrl-P>
  1689.        Show available RAM         ---     <Ctrl-S><Ctrl-R>
  1690.        Set support path           ---     <Ctrl-S><Ctrl-S>
  1691.        Set undo limit             ---     <Ctrl-S><Ctrl-U>
  1692.        ------------------------------------------------------------------
  1693.        Toggle attributes          ---     <Ctrl-T><Ctrl-A>
  1694.        Toggle case                ---     <Ctrl-T><Ctrl-C>
  1695.        Toggle compress at wrap    ---     <Ctrl-T><Ctrl-D>
  1696.        Toggle fixed tabs          ---     <Ctrl-T><Ctrl-F>
  1697.        Toggle hi-bit strip        ---     <Ctrl-T><Ctrl-H>
  1698.        Toggle insert mode         ---     <Ins>
  1699.        Toggle autoindent mode     ---     <Ctrl-T><Ctrl-I>
  1700.        Toggle right justify       ---     <Ctrl-T><Ctrl-J>
  1701.        Toggle 43 line mode        ---     <Ctrl-T><Ctrl-L>
  1702.        Toggle marker display      ---     <Ctrl-T><Ctrl-M>
  1703.        Toggle pagination          ---     <Ctrl-T><Ctrl-P>
  1704.        Toggle macro record        ---     <Ctrl-T><Ctrl-R>
  1705.        Toggle snow check          ---     <Ctrl-T><Ctrl-S>
  1706.        Toggle tab line            ---     <Ctrl-T><Ctrl-T>
  1707.        Toggle block cursor        ---     <Ctrl-T><Ctrl-U>
  1708.        Toggle tab writing         ---     <Ctrl-T><Ctrl-V>
  1709.        Toggle word wrap           ---     <Ctrl-T><Ctrl-W>
  1710.        Toggle tab expansion       ---     <Ctrl-T><Ctrl-X>
  1711.        Toggle initial zoom        ---     <Ctrl-T><Ctrl-Z>
  1712.        ------------------------------------------------------------------
  1713.        Show help summary          ---     <Ctrl-X><Ctrl-A>
  1714.        Block help                 ---     <Ctrl-X><Ctrl-B>
  1715.        Cursor help                ---     <Ctrl-X><Ctrl-C>
  1716.        Delete help                ---     <Ctrl-X><Ctrl-D>
  1717.        Find/Replace help          ---     <Ctrl-X><Ctrl-F>
  1718.        Status help                ---     <Ctrl-X><Ctrl-H>
  1719.        File help                  ---     <Ctrl-X><Ctrl-I>
  1720.        Function keys              ---     <Ctrl-X><Ctrl-K>
  1721.        Flush undo buffer          ---     <Ctrl-X><Ctrl-L>
  1722.        Macro help                 ---     <Ctrl-X><Ctrl-M>
  1723.        Insert undo buffer         ---     <Ctrl-X><Ctrl-N>
  1724.        Spelling help              ---     <Ctrl-X><Ctrl-P>
  1725.        Quick movement help        ---     <Ctrl-X><Ctrl-Q>
  1726.        Print Format help          ---     <Ctrl-X><Ctrl-R>
  1727.        Setting help               ---     <Ctrl-X><Ctrl-S>
  1728.        Tab help                   ---     <Ctrl-X><Ctrl-T>
  1729.        Utility help               ---     <Ctrl-X><Ctrl-U>
  1730.        Window help                ---     <Ctrl-X><Ctrl-W>
  1731.        Text help                  ---     <Ctrl-X><Ctrl-X>
  1732.        ------------------------------------------------------------------
  1733.  
  1734.  
  1735.                                    Appendix II
  1736.  
  1737.  
  1738.  
  1739.  
  1740.  
  1741.  
  1742.  
  1743.        
  1744.                           WordMaster Function Key Commands
  1745.                      |-------------------|--------------------|
  1746.        Ctrl          | Go to DOS Shell   | Find and Replace   |
  1747.        Shift         | Change Directory  | Find Next          |
  1748.        Alt           | Help              | Find Pattern       |
  1749.                 F1   | Activate Menus    | Undo               |  F2
  1750.                      |-------------------|--------------------|
  1751.        Ctrl          | Begin Block       | Load Macro File    |
  1752.        Shift         | Move Block        | Save Macros to File|
  1753.        Alt           | Copy Block        | Edit Macros        |
  1754.                 F3   | End Block         | Macro Menu         |  F4
  1755.                      |-------------------|--------------------|
  1756.        Ctrl          | Delete Block      | Set Right Margin   |
  1757.        Shift         | Reformat Block    | Set Left Margin    |
  1758.        Alt           | Restore Tabs      | Margin at Cursor   |
  1759.                 F5   | Edit Tabs         | Reformat Paragraph |  F6
  1760.                      |-------------------|--------------------|
  1761.        Ctrl          |                   | Open Window        |
  1762.        Shift         | Print File        | Close Window       |
  1763.        Alt           | Abandon File/Exit | Go to Next Window  |
  1764.                 F7   | Save/Exit         | Center Line        |  F8
  1765.                      |-------------------|--------------------|
  1766.        Ctrl          |*Spell Check Page  | File Directory     |
  1767.        Shift         |*Spell Check Word  | Edit Another File  |
  1768.        Alt           |*Thesaurus         | Write to Named File|
  1769.                 F9   | Save/Continue     | Open File          |  F10
  1770.                      |-------------------|--------------------|
  1771.  
  1772.        
  1773.  
  1774.  
  1775.  
  1776.  
  1777.  
  1778.  
  1779.  
  1780.        *Must have Turbo Lightning installed.
  1781.  
  1782.        So that this will print out in a size suitable for easy reference,
  1783.        the control characters for compressed printing have been entered
  1784.        before the beginning of the table and again after the end of the
  1785.        table.  It is useful to cut this out (or print a second copy) to
  1786.        have to refer to as you are learning the function key commands.
  1787.  
  1788. |pa
  1789.  
  1790.  
  1791.                                  Registration
  1792.  
  1793.  
  1794.        In the United States, Canada and other countries in the western
  1795.        hemisphere, please register directly with MasterWorks.
  1796.  
  1797.  
  1798.  
  1799.                                    MasterWorks
  1800.                                   P.O. Box 116
  1801.                                McCleary, WA 98557
  1802.  
  1803.  
  1804.        Please enclose $30 for each copy of WordMaster 1.41 you wish to
  1805.        register.  Washington State residents add 7.8% sales tax. ($2.34)
  1806.  
  1807.  
  1808.                                   * * * * * * *
  1809.  
  1810.  
  1811.        Outside the United States you may find it more convenient to
  1812.        register with one of WordMaster's authorized distributors.
  1813.  
  1814.  
  1815.                                   Gunter Hager
  1816.                                   Ahrweg 19
  1817.                                   5305 Alfter
  1818.                                   W. Germany
  1819.  
  1820.                                   George Lasich
  1821.                                   TELAMED
  1822.                                   P.O. Box 273
  1823.                                   7506 Panorama
  1824.                                   South Africa
  1825.  
  1826.  
  1827.  
  1828. |pa
  1829.  
  1830.                                REGISTRATION FORM
  1831.  
  1832.  
  1833.  
  1834.        Mail this completed form to appropriate address on the previous page
  1835.        with correct payment.
  1836.  
  1837.        Please give your name as you wish to have it appear on the
  1838.        WordMaster opening screen.  Use an additional page if you are
  1839.        registering multiple copies in several names.
  1840.  
  1841.  
  1842.        Name                                                              
  1843.  
  1844.        Address                                                           
  1845.  
  1846.        City                               State           Zip            
  1847.  
  1848.  
  1849.              No. of registered copies at $30 each?                       
  1850.  
  1851.              Total payment enclosed.                                     
  1852.  
  1853.  
  1854.                                     * * * * *
  1855.  
  1856.  
  1857.        We would appreciate knowing where you obtained WordMaster --
  1858.        PC-SIG, Bulletin Board (which one?), a friend, etc.
  1859.  
  1860.                                                                          
  1861.  
  1862.  
  1863.        We are constantly striving to improve WordMaster, so any comments or
  1864.        suggestions will be appreciated.
  1865.  
  1866.                                                                          
  1867.  
  1868.                                                                          
  1869.  
  1870.                                                                          
  1871.  
  1872.                                                                          
  1873.  
  1874.                                                                          
  1875.  
  1876.